Web and MAC Authentication
Configuring MAC Authentication on the Switch
Syntax: show port-access mac-based clients <port-list> detailed
Displays detailed information on the status of MAC-
authenticated client sessions on specified ports.
ProCurve(config)# show port-access mac-based clients 1 detailed
Port Access MAC-Based Client Status Detailed
Client Base Details :
Port : 1
Session Status : authenticated Session Time(sec) : 6
Username : client1 MAC Address : 0010b5-891a9e
IP : n/a
Access Policy Details :
COS Map : 12345678 In Limit % : 98
Untagged VLAN : 4006 Out Limit % : 100
Tagged VLANs : 1, 3, 5, 6, 334, 4001
RADIUS-ACL List :
deny in udp from any to 10.2.8.233 CNT
Hit Count: 0
permit in udp from any to 10.2.8.233 CNT
Hit Count: 0
deny in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 0.0.0.0/0 CNT
Hit Count: 0
Figure 3-14. Example of show port-access mac-based clients detail Command Output
3-38
