Web and MAC Authentication
Configuring MAC Authentication on the Switch
Configuration Commands for MAC Authentication
Command Page
Configuration Level
aaa port-access mac-based addr-format 3-33
[no] aaa port-access mac-based [e] < port-list > 3-34
[addr-limit] 3-34
[addr-moves] 3-34
[auth-vid] 3-34
[logoff-period] 3-35
[max-requests] 3-35
[quiet-period] 3-35
[reauth-period] 3-35
[reauthenticate] 3-35
[server-timeout] 3-35
[unauth-vid] 3-36
Syntax: aaa port-access mac-based addr-format <no-delimiter | single-dash |
multi-dash | multi-colon | no-delimiter-uppercase | single-dash-
uppercase | multi-dash-uppercase | multi-colon-uppercase>
Specifies the MAC address format to be used in the RADIUS
request message. This format must match the format used
to store the MAC addresses in the RADIUS server. (Default:
no-delimiter)
no-delimiter — specifies an aabbccddeeff format.
single-dash — specifies an aabbcc-ddeeff format.
multi-dash — specifies an aa-bb-cc-dd-ee-ff format.
multi-colon — specifies an aa:bb:cc:dd:ee:ff format.
no-delimiter-uppercase — specifies an AABBCCDDEEFF
format.
single-dash-uppercase — specifies an AABBCC-DDEEFF
format
multi-dash-uppercase — specifies an AA-BB-CC-DD-EE-FF
format
multi-colon-uppercase — specifies an AA:BB:CC:DD:EE:FF
format.
3-33
