IPv4 Access Control Lists (ACLs)
Displaying ACL Configuration Data
Display an ACL Summary
This command lists the configured IPv4 ACLs.
Syntax: show access-list
List a summary table of the name, type, and application status
of IPv4 ACLs configured on the switch.
For example:
ProCurve(config)# show access-list
Access Control Lists
Type Appl Name
---- ----
std yes List-01-v4 IN
ext no List-02-v4 OUT
std yes 55
------------------------------------------
In this switch, the ACL named “List-02-v4-
OUT” exists in the configuration.
Figure 9-26. Example of show access-list Command
Figure 9-27. Example of a Summary Table of Access lists
Term Meaning
Type Shows whether the listed ACL is an IPv4
std AC or an IPv4 ext ACL.
Appl Shows whether the listed ACL has been applied to an interface (
yes/no).
Name Shows the identifier (name or number) assigned to each ACL configured in the switch.
9-86
