A SERVICE OF

logo

132 Settings Options
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Creating and Modifying Profiles
Access: Start | Settings | System tab | Pegasus Settings | Config tab
Prerequisites:
Network SSID number of the Access Point for the MX6
WEP or LEAP Authentication Protocol Keys (LEAP requires Meetinghouse software
described in this chapter.)
Check with your network administrator for the security WEP Key and the Key ID you need to use.
Buttons are located next to “Preferred Profiles:”
New. Create a profile.
Edit. Modify a profile.
Delete. Delete a selected profile.
Move the highlighted profile up to increase the automatic
association priority.
Move the highlighted profile down to decrease the automatic
association priority.
When Using LEAP
With Meetinghouse 2.0.0 you must enable “Provide Encryption Key Dynamically” when using
LEAP on the Aegis client.