20 Set the Power Off Timer
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Set the Power Off Timer
Note: Refer to the section titled "Power Modes" later in this guide for information relating to
the power states of the MX6.
Tap the Start | Settings | System | Power icon. Tap the Advanced tab.
Figure 2-3 Set Power Off Timer
On battery power
• Turn off device if not used for
Enable or disable the checkbox, change the parameter value and tap OK to save the change. The
default is 3 minutes.
Selections are 30 sec, 1, 2, 3, 4, or 5 minutes.
On external power
• Turn off device if not used for
Enable or disable the checkbox, change the parameter value and tap OK to save the change. The
default is 5 minutes.
Selections are 30 sec, 1, 2, 5, 10, 15, or 30 minutes.
Note: When the Power Off timer expires, the computer enters Suspend Mode.
