18
After every wash, turn off the water supply to the
appliance and leave the door slightly ajar so that
moistureandodoursare not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from thesocket.Do not runrisks.
To clean the exterior and rubber parts of the dishwasher,
donot use solvents or abrasive cleaningproducts.
Rather,useonlyacloth andwarm soapywater.
Toremove spotsor stainsfromthe surfaceofthe
interior, usea cloth dampened withwater and a little
vinegar, or a cleaning product made specifically for
dishwashers.
When you go onholiday, it is recommend that you runa
wash cyclewith the dishwasher empty and then remove
the plugfrom the socket, turn off thewater supplyand
leave the door oftheappliance slightly ajar. This will help
the seals to last longer andpreventodours from forming
withinthe appliance.
If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it canbe positioned on
its back.
Oneofthe factors that cause odours to form in the
dishwasher is food that remains trappedin the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
To cleanthe edge around the door,you should use only a soft warm, damp cloth.
Toavoid penetration of water into thedoor lock and electrical components,donot
use aspraycleanerof any kind.
Never use a spraycleaner toclean the door panel asitmay damage the door lock and electricalcomponents.
Abrasive agents or some papertowels shouldnot be used because of therisk of scratching or leaving spots
on the stainless steel surface.
Ensure the voltage and frequencyof thepower being corresponds to
those on the rating plate.Only insert the plug into an electrical socket whichis earthed
properly. Ifthe electricalsocket towhich theappliancemust beconnectedisnot
appropriatefor the plug , replace the socket, rather than usinga adaptors or the like as
they could cause overheating and burns.
Pleaselook at the rating label to know the ratingvoltage and connect the dishwasher to the appropriate power supply.
Usethe required fuse 10amp, time delayfuse orcircuit breakerrecommended and provide separatecircuit serving
only this appliance.
This appliance mustbe earthed. In the eventof amalfunction or breakdown, earthing will reduce the risk of
electric shock byproviding a path of least resistance for the electric current.This appliance is equipped witha
cord having an equipment-earthingconductor and anearthing plug. The plugmustbepluggedintoan
appropriate outlet that is installed and earthed inaccordance with all local standards and requirements.
WARNING!
For personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING
CONNECTION FROM THE POWER CORD.
