Printing out your documents
Printing documents is dependent on your operating sys-
tem (Windows or MS-DOS).
In Windows
Unless you select otherwise in the application, Windows
applications always print to the current Windows
Default Printer. You have probably already made the
LC24-30 Colour the Default Printer when you installed
the printer driver file, (see page 15 of Chapter 2). If you
did not, you can set it as follows:
.
Double-click the Control Panel icon in the Main win-
dow.
.
Double-click the Printers icon
.
Make sure LC24-30 Colour is selected in the
Installed Printers list.
.
Click on Set As Default Printer.
.
Click on Close to return to the Control Panel win-
dow.
To print from your application, select Print from the File
menu. Make the desired on-screen selections, such as
the number of copies, and click on OK.
In MS-DOS
To print from an MS-DOS application, you first need to
select the printer you are going to use from within the
application itself. The way in which you do this depends
on the application. Refer to the application’s manual.
Typically, the program will feature an INSTALL or
SETUP command that allows you to select from a list of
possible printers.
Page 27
