Filter
Top Products
Chapter 2 Getting Started
Installing the RTMCMD Utility and the RTM Report Templates
Cisco SCA BB SNMP Real Time Monitoring User Guide
2-4 OL-12491-01
Step 5 Install these CFG and CGI files into your RTM setup (see Installing the CFG and CGI Files for
Use by MRTG and RRD (on page 3-5)).
Installing the RTMCMD Utility and the RTM Report Templates
To install the SCA BB rtmcmd utility and RTM report templates, complete the following steps:
Step 1 Locate the file scas_bb_util.tgz (located in the SCA BB distribution zip file), and copy it
to a Windows or Linux workstation.
Step 2 Unpack the file to a new folder.
The SCA BB Real-Time Monitoring Configuration Utility, rtmcmd, is located under the bin
folder.
Step 3 Locate the file scasbb_rtm_templates.zip (located in the SCA BB distribution zip file),
and copy it to a Windows or Linux workstation.
Step 4 Unpack the file to a new folder.
Installing the Java Runtime Environment
rtmcmd requires Java Runtime Environment (JRE) version 1.4 or 1.5.
The JRE can be downloaded from the Sun™ website, at:
http://java.sun.com/j2se/1.4.2/download.html
To verify that the JRE is installed, run java -version from the command prompt; the Java
version should start with 1.4 or 1.5.
If a different version of JRE is also installed on the workstation, you may need to tell servconf
where to find the appropriate JRE by setting the JAVA_HOME environment variable to point to
the JRE 1.4 installation directory. For example:
JAVA_HOME=C:\Program Files\Java\j2re1.4.2_08