Filter
Top Products
12
2011 September
800a3-NA
4-SPECIFICATIONS
1. Power Requirements
Electrical: 115 Volt, 60Hz, 3.8 A (220 watts)
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.
2. Operating Rate
Belt speed is 0.5m/s [100 ft/min].
IMPORTANT SAFEGUARD
5. Tape Width
50mm [2 inch] minimum to 75mm [3 inch] maximum
4. Tape
Scotch
®
pressure-sensitive fi lm box sealing tapes.
3. Operating Conditions
Use in dry, relatively clean environments at 5
o
C to 50
o
C [40
o
F to 120
o
F] with clean, dry boxes.
Note: Machine should not be washed or subjected to conditions causing moisture condensation on
components.
• To reduce the risk associated with fire
and explosion hazards:
− Do not operate this equipment in poten-
tially fl ammable or explosive environments.
WARNING
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (455mm) apart minimum.