Filter
Top Products
Top up with rinse aid when the
indicator (B) becomes clear,
Adjusting the dose
According to the finish and drying
results obtained, adjust the dose of
rinse aid by means of the 6
position selector (C) (position 1
minimum dosage, position 6
maximum dosage).
Increase the dose if there are drops
of water or lime spots on the
dishes after washing.
The dose is factory set in position
5.
Reduce it if there are sticky
whitish streaks on the dishes.
Clean up any rinse aid spilt during filling with an absorbent cloth
to avoid excess foaming during the next wash.
Only use branded rinse aid for dishwashers. Never fill the rinse aid
dispenser with any other substances (e.g. dishwasher cleaning
agent, liquid detergent). This would damage the appliance.
Operating instructions
55
BR03
BR02
152969 94/0de-en 8-04-2003 13:04 Pagina 55