AEG G 330 Dishwasher User Manual


 
Operating instructions
65
Starting a washing programme
1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Close the dishwasher door
4. Setting and starting the programme
Turn the programme selector dial clockwise until the programme
marker on the knob corresponds with the letter of the programme
you wish to select.
Press the On/Off push button, the On/Off indicator light will come
on and the machine will start automatically.
5. To interrupt a washing programme in progress
Interrupt, change or cancel a washing programme in progress
ONLY if it’s absolutely necessary
Attention! Hot steam may escape when the door is opened.
There is risk of scalding. Open the door carefully.
Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point in which
it was interrupted.
Pressing the On/Off (in this case the On/Off indicator light turns
off). Press the On/Off push button again; the programme will
start from the point in which it was interrupted.
6. End of the washing programme
The dishwasher will automatically stop.
Switch off the dishwasher by pressing the On/Off push button.
On/Off indicator light turns off.
Hot steam may escape from the appliance when opening the door
immediately after the end of the programme, therefore, open the
door carefully.
152969 94/0de-en 8-04-2003 13:04 Pagina 65