AEG G 330 Dishwasher User Manual


 
Water supply connections
This dishwasher may be fed with either hot (max. 60°) or cold water.
Nevertheless we advise you a cold water supply.
A hot water supply is not always efficient with very soiled crockery as
it shortens the washing programmes a lot.
The dishwasher must not be connected to open hot water appliances
or instantaneous water heaters.
The dishwasher is fitted with safety devices that prevent the wash
water returning into the drinking water system and comply with the
applicable plumbing regulations.
The water pressure must be within the limits given in the technical
specifications. Your local Water Authority will advise you on the
average mains pressure in your area.
The dishwasher features fill and drain hoses which can be turned
either to the left or the right to suit the installation.
The water inlet hose must not be kinked, crushed, or entangled when it
is being connected up.
If the machine is connected to new pipes or pipes which have not
been used for a long time, you should run the water for a few minutes
before connecting the inlet hose.
Do not use, for connection, old hoses which have been used in
another appliance.
Installation instructions
75
152969 94/0de-en 8-04-2003 13:04 Pagina 75