Filter
Top Products
WARNING: WHEN SERVICING OR REPLACING GAS CARRYING COMPONENTS,
DISCONNECT GAS SUPPLY TO APPLIANCE AND AFTER COMPLETION CHECK
APPLIANCE FOR GAS TIGHTNESS.
WARNING: WHEN SERVICING OR REPLACING COMPONENTS, ISOLATE THE
APPLIANCE FROM THE ELECTRIC SUPPLY AND BEFORE RECONNECTING, CHECK FOR
ELECTRICAL SUPPLY.
A. TO REMOVE HOTPLATE
1. Isolate from electric supply.
2. Remove pan supports and burner caps. (See Fig. 20)
3. Remove burner fixing screws (10) and hotplate fixing nuts (4).
4. Lift off burner fixing rings (4).
5. Lift off hotplate castings in the following order: right hand and left hand. (See Fig. 21).
NOTE: Each hotplate casting has an earth lead. Each lead must be disconnected before
completely removing hotplate casting. (See Fig. 22).
6. Re-assemble in reverse order.
45
Fig. 20
Fig. 21
DESN 513520
DESN 513522