Filter
Top Products
N. TO REMOVE OVEN AND GRILL LINERS - SEE FIG. 31
1. Remove LH and RH runners (4 screws per runner).
2. Remove runners and liners.
O. TO REMOVE ELEMENTS (TOP OVEN)
1. Isolate from electrical supply.
2. Proceed as TO REMOVE OVEN AND GRILL LINERS’.
3. Remove oven element fixing screws (2) at the rear of the oven and flex elements to
remove from location bracket, pull forwards to expose terminal connections.
4. Remove connection, make sure they do not fall down the back of the appliance.
NOTE: TOP OVEN has two elements, one behind each side liner. Both remove in the
same was as each other.
5. Re-assemble in reverse order.
P. TO REMOVE FAN OVEN ELEMENT
1. Isolate from electric supply.
2. Proceed as ‘TO REMOVE OVEN LINERS’.
NOTE: You will need only to remove one side.
3. Remove (4) fan cover fixing screws and withdraw panel.
4. Remove 3 screws securing element to frame and carefully withdraw element until access
can be made to the electrical terminals.
5. Disconnect terminals taking care not to allow the cable to fall down the rear of the
appliance.
6. Re-assemble in reverse order.
Q. TO REMOVE OVEN FAN
1. Isolate from electric supply.
2. Proceed as ‘TO REMOVE OVEN ELEMENT’.
3. Remove 4 fixing screws securing fan assembly to frame.
4. Withdraw fan assembly sufficiently to gain access to motor electrical terminals and
disconnect cables.
5. Remove fan blade.
NOTE: Fan blade fixing nuts is LH thread.
6. Remove motor from mounting plate screws.
7. Re-assemble in reverse order.
52
Fig. 31 DESN 512415