Filter
Top Products
43
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
How To Remove the Range for
Servicing
Follow these procedures to remove appliance for
servicing:
The range is very heavy. Take great care. We
recommend two people maneuver the range.
Ensure that the fl oor covering is fi rmly attached,
or removed to prevent it being disturbed when
moving the range around. You will need the
leveling tool.
Pull the drawer out to its furthest point.
Lift up the ends of the plastic clips (one each side)
to release the catches holding the drawer to the
side runners and at the same time pull the drawer
forward and away from the side runners. For
safety’s sake push the drawer runners back out of
the way. Put the drawer somewhere safe - do not
refi t it until you have fi nished, you will need access
to the area behind the drawer.
Fit the leveling tool on the rectangular adjuster as
shown below.
Lower the front roller by turning the leveling tool
clockwise until the front feet are just clear of the
fl oor.
Slide range forward to disengage the range from
the anti-tip bracket.
Disconnect electrical supply to appliance and
unplug the electrical supply cord.
Reverse procedure to reinstall.
If your range is removed for any reason, make sure
the anti-tip device is re-engaged properly when
the range is replaced. Failure to take this precaution
could result in tipping of the range and cause
injury.