Filter
Top Products
INSTALLATION MANUAL • MN-29805 • 16.
INSTALLATION
OPTIONAL HAND HELD SPRAY HOSE
Valve bracket
INSTALLATION
1. Two pre-drilled holes with screws in place are located at the lower rear
side of the unit (same side as door opening). Remove screws, position
valve bracket and attach using the 2 self drilling screws.
2. Three pre-drilled holes with screws in place are located at the upper front
side of unit (same side as door opening). Remove screws, position sprayer
hanger and fasten using the 3 self-drilling screws.
3. Connect the sprayer hose to the valve and place the sprayer in the hanger.
4. Continue to connect an incoming water supply line to the valve.
Sprayer hanger
Sprayer hose
Valve