Amana ARTC7114* Range User Manual


 
16
Prepare to Bake
CAUTION
!
To reduce risk of food poisoning due to bacterial
growth and production of toxins, never hold meat,
milk, fish or eggs for more than 2 hours before
cooking.
Remove Items Stored in Oven
Remove any pans and other cooking utensils stored in
oven.
Remove Items Stored in Oven
Oven Racks
Range includes 3 oven racks. The EvenAir™ convection
baking feature allows you to use all 3 racks
simultaneously while providing even browning and faster
baking times. See “Convection Pan Placement” section.
Oven Rack Placement
Position oven rack before turning oven on.
WARNING
!
To avoid damaging oven liner or creating fire, do not
line oven bottom or oven racks with foil.
1. Pull rack forward to stop position.
2. Raise front edge of rack and pull until rack is out of
oven.
3. Place rack in new rack position.
Curved edge of rack must be toward rear of oven.
Oven Rack Placement
Setting Electronic Clock
Electronic clock has 3 modes—Clock displayed (shows
time-of-day), set clock (flashing), and clock not displayed
(does not show time-of-day). Press
CLOCK
pad to
advance through modes.
When power is connected or restored, display flashes
until pad is pressed or temperature knob is turned. Reset
clock.
1. Verify display is flashing.
If display does not flash, press
CLOCK
pad
repeatedly until display flashes.
2. Press
HRS
+ or - pad to set hours and
MINS
+ or -
pad to set minutes.
3. Press
CLOCK
pad to save time-of-day.
Clock saves time-of-day approximately 60 seconds
after time is entered if
CLOCK
pad is not pressed.
Turning Off/On Clock Display
Press
CLOCK
pad until display is blank. Clock retains
time while not displayed. To turn on display, press
CLOCK
pad until time-of-day displays and is not flashing.
Setting Electronic Timer
The minute timer is a timer only. Electronic timer does not
control bake, broil, or self-clean function. Timer can be set
up to 11 hours and 59 minutes.
1. Press
TIMER
pad.
2. Press
HRS
+ or - pad to set hours and
MINS
+ or -
pad to set minutes.
Timer begins counting down automatically after
time is entered.
To view clock while timer counts down, press
CLOCK
pad. To view timer again, press
TIMER
pad.
3. Press
TIMER
pad again to cancel.
After time elapses, timer beeps approximately once
a second until
TIMER
pad is pressed.
Resetting and Canceling Timer
To reset or cancel timer, display must show remaining
time. If display does not show remaining time, press
TIMER
pad.
To reset the time when remaining time is displayed, press
the
HRS
+ or - pad to set hours and
MINS
+ or - pad to
set minutes until new time displays.
To cancel timer when remaining time is displayed or
signal after time elapses, press
TIMER
pad.