Filter
Top Products
15
Using the Oven Control
Flashing Display
When power is connected
or interrupted, oven display flashes.
Press CLOCK to reset display.
Clock may need to be reset.
Timer Signal
When time elapses, timer will sound
three one-second beeps and then once
every 30 seconds. END also displays.
Press TIMER ON/OFF pad to stop timer
and return to clock display.
Setting Electronic Clock
12 hour clock does not display AM, PM or military time. When power is
connected or restored, display flashes until CLOCK or CANCEL pad is
pressed.
1. Press CLOCK pad.
2. Press digit pads (1 through 0) until correct
time-of-day displays.
3. Press START pad to set time, or time is set
after 5 seconds of no adjustment.
Setting Minute Timer
Timer is a timer only. Electronic timer does not control bake, broil or
self-clean function. Timer can be set up to 11 hours and 59 minutes.
1. Press TIMER ON/OFF pad.
2. Press digit pads (1 through 0) until desired time displays.
Timer begins counting down automatically
after time is entered.
To view clock while timer counts down,
press CLOCK pad. Timer will return after
approximately 3 seconds of no input.
3. Press and hold TIMER ON/OFF pad to cancel timer signal.
After time elapses, timer beeps three one-second tones, and then
once approximately every 30 seconds until CANCEL is pressed.
END is also displayed when the timer finishes.
Resetting and Canceling Timer
To reset the time when remaining time is displayed, press
TIMER ON/OFF pad, then use the digit pads to enter the new time.
To cancel timer when remaining time is displayed or when signal is
beeping, press and hold TIMER ON/OFF pad for approximately
3 seconds or press CANCEL pad. CANCEL will stop all cooking
functions if the oven is in use.