Filter
Top Products
16
Using the Oven Control (cont'd)
Broiling
Broiling sears in natural juices and provides charbroiled flavor.
To broil, center food on broiling grid and pan and place on proper rack in
oven. Do not place aluminum foil over boiling pan, oven rack or oven
bottom. Oven door must be fully closed. Broiling does not require
preheating so you can place food in oven while it is still cool.
1. Adjust oven racks to desired position.
2. Place food on desired rack.
3. Close oven door.
4. Press BROIL pad.
SET and BROIL flash in display.
Broil temperature setting defaults to HI.
To change broil setting, use digits 1 (LO) to 5 (HI).
5. Press START pad.
Broil begins automatically.
BROIL, ON and broil element graphic display.
6. Keep oven door closed.
If oven door is ajar for more than 3 minutes,
broil cycle will stop.
If broil cycle stops because the door was open
too long, close oven door and wait for the ignitor
to lite the broil burner.
7. After broiling, remove food and press OVEN
CANCEL to turn off broiler.
8. To end broil cycle press OVEN CANCEL pad.
Baking
While oven is still cool, remove any stored items from the
oven cavity.
1. Place racks in desired position and close oven door.
2. Press BAKE pad.
SET and BAKE flash in display.
Temperature default of 350° displays.
3. Use digit pads (1 through 0) to enter desired oven
temperature.
Temperature range is 170°F to 550°F.
4. Press START pad.
Bake mode starts automatically
BAKE, ON and bake element graphic display.
Current oven temperature is displayed during
baking cycle.
5. Oven emits a single beep when it has reached
baking temperature.
6. Open door carefully and place food in oven.
7. After cooking time elapses, remove food and
press OVEN CANCEL pad to shut off oven.
WARNING
!
To avoid risk of personal injury,
property damage or fire, do not
line oven bottom, racks, or broiler
pan and grid with aluminum foil.
WARNING
!
To avoid risk of personal injury,
property damage or fire, never
leave oven unattended while
broiling.
Preheat Signal
After setting oven to bake and selecting
a temperature, oven preheats. When
oven reaches set temperature, the preheat
signal sounds.
Why is the oven smoking?
With new ovens, some minor smoking
is normal when using the oven for first
few times. Performing a self-clean
cycle should stop further smoking.
How Do I Change the
Temperature?
While the oven is baking, simply press
BAKE, enter the desired temperature,
and then press START. Use these steps
to change the oven temperature during
Timed and Delayed Baking, also. To
change cook time during Timed or
Delayed Baking, press COOK TIME,
enter the desired cooking time, and
press START.