Filter
Top Products
7
Repairs Incorrectly done repairs are dangerous.
ṇ There is a risk of electrocution.
Repairs may only be carried out by after–sales
service technicians who have been fully trained by
BSH.
If there is a fault, switch off the oven fuse at the fuse
box. Call the after–sales service.
Reasons for
damage
Baking tray, aluminium foil Do not place the baking tray on the oven floor.
or dishes on the oven floor Do not cover it with aluminium foil.
Do not place dishes on the oven floor.
This will cause heat accumulation. The baking and
roasting times will no longer be correct and the
enamel will be damaged.
Water in the oven Never pour water directly into a hot oven.
This could damage the enamel.
Fruit juice When baking very moist fruit cakes, do not put too
much on the baking sheet. Fruit juice dripping from
the baking sheet leaves stains that cannot be
removed.
It is recommended that you use the deeper universal
pan.
Cooling with the oven door Only leave the oven to cool with the door closed. Do
open not allow anything to become trapped in the oven
door. Even if you only leave the oven door open
slightly, the fronts of adjacent units may become
damaged over time.
Very dirty oven seal If the oven seal is very dirty, the oven door will no
longer close properly when the oven is in use. The
fronts of adjacent units could be damaged. Keep the
oven seal clean.
Using the oven door as a Do not stand or sit on the oven door.
seat