Breville BES830XL Coffeemaker User Manual


 
30
ESPRESSO MAKING TIPS
31
ESPRESSO MAKING TIPS
THE RIGHT MEASUREMENT
A single espresso is made with ¼ ounce or
7g of ground espresso. A level measure of
the tamp/spoon is the correct amount of
ground espresso for a single espresso and
2 level measures for a double espresso.
When grinding for a Single Wall Filter
using a fi ner espresso grind, you will
need to increase the grind amount
to ensure the fi lter is correctly fi lled.
TAMPING CORRECTLY
Level the desired amount of coffee by
gently tapping the side of the portafi lter
before pressing down fi rmly with the
tamping end of the measuring spoon.
When packing for a double espresso it is
important only to tamp after the second
measure. Tamping between measures
will create a layer in the coffee that can
impede full extraction.
PURGE THE GROUP HEAD
Before inserting the portafi lter, run some
water through the group head. It will
ensure that your machine has a last
minute ‘clean through’ and stabilizes the
temperature prior to extracting.
NOTE:
Make sure to wipe off any excess coffee
from the rim of the fi lter to ensure a
proper seal is achieved under the
group head.
EXTRACTING YOUR ESPRESSO
The most common mistake in extracting is
to over extract from your ground espresso.
This results in a bitter beverage with visibly
bleached créma. Créma is the caramel
colored layer that fl oats on top of the
espresso following extraction.
NOTE:
The taste of your espresso will, of
course, depend on personal preference
and on many other factors such as the
type of coffee bean used, the coarseness
or fi neness of the grind and the tamping
pressure (pressed down). We recommend
experimenting by varying these factors
to achieve the espresso taste of your
preference.
WARMING YOUR CUP OR GLASS
A warm cup will help maintain the
espresso’s optimal temperature. Preheat
your cup by storing on the cup warming
tray or rinsing with hot water from the hot
water wand.
NOTE:
Always properly clean your machine after
each use.
WARMING THE PORTAFILTER
A cold portafi lter can drop the extraction
temperature enough to signifi cantly affect
the quality of your espresso. Always
ensure the portafi lter is preheated by
running hot water through it before
preparing the espresso.
NOTE:
Always wipe the fi lter and portafi lter dry
before tamping with ground espresso as
moisture can encourage ‘drilling’ - this is
when water bypasses the ground
espresso coffee during extraction.
USING PRE-GROUND ESPRESSO
If using a pre-ground espresso, ensure
an espresso grind suitable for espresso/
cappuccino machines is purchased.
If grinding coffee beans, the grind should
be fi ne but not too fi ne or powdery. The
grind will effect the rate at which the
water fl ows through the espresso coffee
in the fi lter and therefore the taste of the
espresso.
If the grind is too fi ne (looks like powder
and feels like fl our when rubbed between
fi ngers), the water will not fl ow through
the coffee even when under pressure. The
resulting coffee will be over extracted, too
dark and bitter, with a mottled and uneven
créma on top.
If the grind is too coarse the water will fl ow
through the ground espresso too quickly.
This will result in an under-extracted
espresso lacking in fl avor and without the
thick créma on the top of the espresso.
SELECT A
FINER
GRIND
1/8"
DECREASE
TAMP
PRESSURE
REMEDY 1 REMEDY 2
Over
Espresso
Range
CORRECT EXTRACTION
Within
Espresso
Range
• Crema* is golden with
a fine mousse texture
• Espresso is dark brown
* Crema is the caramel
colored layer that floats
on top of the espresso.
AFTER EXTRACTION 1
AFTER EXTRACTION 2
REMOVE USED
GRINDS
Knock grinds out
gently. It is normal
that grinds are wet.
RINSE FILTER
Keep the filter clean
to prevent blockages.
Without ground coffee
in the filter, lock the
Portafilter into the
machine and run hot
water through.
UNDER EXTRACTION
• Crema is thin and pale
• Espresso is pale brown
• Tastes bitter or
weak/watery
Under
Espresso
Range
OVER EXTRACTION
• Flow drips or not at all
• Crema is dark and spotty
• Espresso is very dark brown
• Tastes bitter and burnt
REMEDY 3
Adjust & re-test
LOCK
INSERT
Adjust & re-test
SELECT A
COARSER
GRIND
Adjust & re-test
USE LESS
COFFEE
1/8"
INCREASE
TAMP
PRESSURE
REMEDY 1 REMEDY 2 REMEDY 3
Adjust & re-testAdjust & re-test
SELECT A
FINER
GRIND
Adjust & re-test
USE MORE
COFFEE
BES830XL_IB_Issue1,09.indd 30-31BES830XL_IB_Issue1,09.indd 30-31 4/1/10 11:02:46 AM4/1/10 11:02:46 AM