Filter
Top Products
12
13
New photo of machine showing
water tank being removed
ASSEMBLING YOUR BREVILLE DIE-CAST PROGRAMMABLE ESPRESSO MACHINE
STEP 1
Insert the storage tray into the base of the
machine and slide towards the back wall.
The storage tray conveniently stores the
cleaning tool, stainless steel fi lters and
measuring/tamping spoon when not in
use, so they are not misplaced.
STEP 2
Insert the ‘Empty Me!’ full indicator into
position in the drip tray and place the
stainless steel grid on top. Slide the
drip tray into position in the base of the
machine in front of the storage tray.
STEP 3
Slide the water tank over the drip tray
and into the front opening of the machine
and into position above the storage tray.
Ensure the water tank aligns fl ush with the
sides of the machine.
NOTE:
Before each use it is recommended to
complete a water fl ushing operation,
without ground coffee, to ensure that
all internal piping has been preheated.
Refer to Steps 1 to 6 in ‘One-Time
Priming’, page 14
Operating
BES830XL_IB_Issue1,09.indd 12-13BES830XL_IB_Issue1,09.indd 12-13 4/1/10 11:02:41 AM4/1/10 11:02:41 AM