Filter
Top Products
18 19
PAge heAder..... PAge heAder.....
OPERATING YOUR BREVILLE PRODUCT
REPROGRAMMING SHOT
DURATION
The 1 CUP and 2 CUP buttons use duration
to control espresso volume. Reprogram
the preset 30 second duration to your
preference.
Press MENU button until ‘SHOT VOL’
flashes and either ‘1 CUP’ or ‘2 CUP’ is
displayed, depending on the button you’d
like to reprogram.
Without the portafilter in place, press the
button you’d like to reprogram (either 1 CUP
or 2 CUP button) to start water flow from
the group head. Using the shot clock on the
LCD, press the 1 CUP or 2 CUP button once
the required duration has been reached.
Reprogramming 1 CUP button
Reprogramming 2 CUP button
The machine will beep. Press the EXIT
button to set the new duration.
REPROGRAMMING SHOT
VOLUME
The 1 CUP and 2 CUP buttons use duration
to control espresso volume. Access the
Advanced Features if you wish to use
volumetric controls instead of duration
to determine espresso volume (refer to
‘Volumetric Control (vOL)’, page 23). Then
follow these instructions:
Press MENU button until ‘SHOT VOL’
flashes and either ‘1 CUP’ or ‘2 CUP’ is
displayed, depending on the button you’d
like to reprogram.
Dose & tamp the portafilter with ground
coffee. Insert the portafilter into the
group head. Press the button you’d like to
reprogram (either 1 CUP or 2 CUP button)
to start espresso extraction. Press the 1 CUP
or 2 CUP button once the desired volume of
espresso has been extracted. The machine
will beep. Press the EXIT button to set the
new volume.
OPERATING YOUR BREVILLE PRODUCT
EXTRACTION TEMPERATURE
Press MENU button until ‘SHOT TEMP’
flashes. The LCD will display the current
shot temperature.
Press UP or DOWN arrow to adjust
the temperature. The default is set at
200°F (93°C) but can be changed from
190°F – 205°F (86°C – 96°C).
The optimum temperature will depend
on the origin of the coffee beans, their
freshness and degree of roast.
We recommend a temperature range
between 194°F – 203°F (90°C – 95°C)
for optimal flavor.
The new temperature will be displayed
on the LCD. Press the EXIT button to set.
SET CLOCK
Setting the clock is optional. Press MENU
button until ‘SET CLOCK’ flashes. The
default is 12.00AM if time has not been set.
Press UP or DOWN arrow to adjust the time.
For faster scrolling, press and hold the UP or
DOWN arrow. Press the EXIT button to set.