Filter
Top Products
32 33
CARE & CLEANING
CARE & CLEANING
CLEANING CYCLE
• CLEAN ME! will be displayed on the
LCD to indicate when a cleaning cycle
is required (approx. 200 shots).
• Insert the 1 CUP filter basket into
the portafilter, followed by the
supplied cleaning disc, followed by
1 cleaning tablet.
• Lock the portafilter into the group head,
ensuring it is rotated to the right until
the handle is securely locked in place.
• Ensure the water tank is filled with
cold water and empty the drip tray.
• Press MENU button until
‘CLEAN CYCLE’ flashes and ‘PUSH’
is displayed on the LCD.
• To start the cleaning cycle press the
illuminated MANUAL button.
• ‘CLEAN CYCLE’ will flash and the
machine will start to countdown from
370 seconds.
• When the cleaning cycle has finished,
remove the portafilter and ensure
the tablet has completely dissolved.
If the tablet has not dissolved, repeat
the steps above, without inserting a
new tablet.
• The cleaning cycle is now complete.
Rinse the portafilter and filter basket
thoroughly to remove any tablet residue
before using.
INSTALLING WATER FILTERS
• Discard the used water filter. Soak a new
filter in a cup of water for 5 minutes,
then rinse under cold running water.
• Wash the water filter holder with cold
water, taking specific care to rinse the
stainless steel mesh.
• Insert the new water filter into the two
parts of the water filter holder.
• To install the assembled water filter
holder into the water tank, align the base
of the water filter holder with the adapter
inside the water tank. Push down to lock
into place.
• Slide the water tank back into position
at the back of the machine and lock
into place.
NOTE
To purchase additional water filters,
visit www.breville.com or call
Breville Consumer Support.