Filter
Top Products
9
ASSEMBLY & OPERATION
BEFORE FIRST USE
Remove any packaging material and
promotional labels. Remove the blending shaft
from the motor body and wash it in warm
soapy water (follow the instructions on page
10 “To detach the blending shaft”). Rinse
and dry thoroughly. Ensure no water remains
inside the blending shaft to avoid water
running into the motor body when reattached.
Disassemble and wash the chopping
blade, chopping bowl, chopping bowl lid,
storage lid and blending jug in warm soapy
water, rinse and dry thoroughly. Ensure
no water remains in the chopping bowl lid
attachment to avoid water running into the
motor body when reattached.
NOTE
The detachable blending shaft,
chopping bowl, chopping blade,
blending jug and dual purpose storage
lid/anti-slip mat can also be washed in
the dishwasher. The chopping bowl lid
is not dishwasher safe – see the care
and cleaning section of this booklet for
cleaning instructions of these parts.
This stick blender is a versatile appliance
that can be attached to:
• The stainless steel blending shaft– for
use as a stick blender
• The chopping bowl with chopping blade
and lid – for use as a mini chopper
STICK BLENDER
TO ATTACH THE BLENDING SHAFT
Hold the blending shaft with the blades
down, and align the top end of the blending
shaft with the corresponding end of the
motor body and push until the blending
shaft ‘clicks’ and locks onto the motor body.
Always ensure blending shaft is dry with no
water left inside before reattaching.
TO USE AS A STICK BLENDER
Ensure the blending shaft is assembled to
the motor body as detailed above.
1. Place food to be processed into the
blending jug provided (or a sufficiently
large mixing bowl or saucepan). The jug
provided should only be ½ full or less
when blending liquids or when making a
puree of fruit and/or vegetables.
2. Insert the plug into a 110/120V
power outlet.
3. By turning the speed control dial at
the top of motor body, select a speed
between 'LOW' and 'HIGH'.
NOTE
If selecting 'HIGH' speed, it is
recommended that you start with
'LOW' speed and then increase to
'HIGH' speed to avoid splattering and
over processing.
4. Place the blending shaft as deeply as
possible into the blending jug and
press the trigger switch to turn the stick
blender on. The button must be held for
the required duration of operation.
BSB400XL_IB_A11.indd 9 12/04/11 11:03 AM