Filter
Top Products
10
11
ASSEMBLING YOUR BREVILLE DIE CAST SERIES™ ESPRESSO MACHINE
ASSEMBLING YOUR BREVILLE DIE CLASSSERIES ESPRESSO MACHINEASSEMBLING YOUR BREVILLE DIE CASTSERIES ESPRESSO MACHINE
Your Die Cast Series Espresso machine will
have the Drip Tray and Water Tank in place
when you unpack it from the box.
The Storage Tray, 2 stainless steel Filters,
Cleaning Tool and Measuring/tamping
Spoon will be packed in a plastic sleeve.
The Filter Holder and Frothing Jug will be
packed inside the foam packaging. Ensure
you have located all parts and accessories
before throwing out the packaging.
Remove the Drip Tray and Water Tank and
wash all parts and accessories in warm,
soapy water using a non-abrasive washing
liquid. Rinse and dry thoroughly.
TO REASSEMBLE: STEP 1
Insert the Storage Tray into the base of
the machine and slide in towards the back
wall.
This is a convenient location to store the
Cleaning Tool, stainless steel Filters and
Measuring/tamping Spoon when not in use,
STEP 2
Slide the Drip Tray, with the Drip Tray Full
Indicator and Grid in place, into the base of
the machine and in front of the Storage
Tray.
STEP 3
Slide the Water Tank over the Drip Tray
and
into the front opening of the machine and
into position above the Storage Tray.
Ensure the Water Tank aligns flush with
the sides of
the machine.
Before first use: It is recommended to
complete a water brewing operation
without ground
coffee before brewing your first espresso
coffee to ensure that all internal piping has
been preheated (follow Steps 1 and 4 in
Operating your Breville Die Cast Series
Espresso Machine – Pages 13 and 15).
NOTE:Do not clean any of the
parts or accessories in the
BR6659_800ESXL_Book_US.qxp 15/2/06 4:54 PM Page 10