Filter
Top Products
NOTE: The dual blower model has the same dimensions than the single blower model, but does not have a horizontal discharge.
Refer to single blower power pack illustration for back and side views, and discard horizontal discharge measurements.
3. PREPARE CUSTOM HOOD
The custom hood must be constructed to fit the shape and total weight of the EC62 power pack model. The recommended
minimum thickness for the custom hood base is 5/8”. If an optional custom hood liner will be installed, we recommend the sides
and front of the custom hood to be 3/4” thick. If the optional custom hood liner will not be installed, the custom hood sides and
front thickness are at the installer’s discretion. See chart and illustration for details.
POWER PACK
TYPES
TOTAL
WEIGHT
SINGLE BLOWER 33 LB
DUAL BLOWER 45 LB
28
1
/8”
26
5
/8”
TOP VIEW
10
1
/8”
3 ³/
16”
9¾”
1¾”
2
15
/16”
11/16”
13¼”
14¾”
10½”
5/8”
3 ³/
16”
10
15
/16”
BACK VIEW SIDE VIEW
HK0104A
13
5
/16”
1¾”
7/8”
5/8”
- 5 -
SINGLE BLOWER POWER PACK
DUAL BLOWER POWER PACK
HK0114A
13
5
/16”
1¾”
7/8”
5¼”
ø10”
TOP VIEW
WARNING
When building a custom hood, always follow all applicable construction codes and standards. The custom
hood must be positively secured to wall studs or other wooden framework behind the drywall. Make sure
it is capable of supporting its own weight and the weight of the power pack. Failure to do so may cause
personal injury or damage to countertop or cooktop.
!