Filter
Top Products
Page 46
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
ENABLE FRESH TIMER
This function allows the operator to enable the Freshness
Alert and set the expiration time. The expiration time is
the amount of time the product is allowed to sit in the
server/dispenser before a fresh batch is brewed.
Procedure for enabling/setting the Freshness Timer:
Range: Iced Tea 0.5 to 10.0 hrs. Hot Tea 0.5 to 8.0
hrs. Iced Coffee 0.5 to 8.0 hrs. Coffee 0.5 to 4.0 hrs.
If enabled, default setting is 8.0 hrs. for Iced Tea,
2.0 hrs for Hot Tea, 4.0 hrs for Iced Coffee, and 2.0
hrs. for Coffee.
1. Press and hold the right hidden button until the
display reads SET LANGUAGE. Press the right hid-
den button until the display reads ENABLEFRESH-
TIMER.
2. Press and release the NO button to disable this
function, or:
3. Press and release the YES button to enable this
function (the unit will display a message once the
set time has expired).
4. When finished, press and release DONE to save
the new setting and advance to the next function
screen.
5. If NO was selected, the display should now read
REFILL. To exit programming and return to the MAIN
SCREEN, press and release the ON/OFF pad.
6. If
YES was selected, the display should now read
TEA. This screen allows the operator to set the
amount of time from the end of brewing a batch of
tea until a Freshness Alert message will be displayed.
Using (-) and (+), adjust the freshness time for tea.
When finished, press and release DONE.
7. The display should now read HOT TEA. Using (-)
and (+), adjust the freshness time for hot tea. When
finished, press and release DONE.
8. The display should now read ICED COFFEE. Using
(-) and (+), adjust the freshness time for iced coffee.
When finished, press and release DONE.
9. The display should now read COFFEE. Using (-)
and (+), adjust the freshness time for coffee. When
finished, press and release DONE.
10. This display should now read REFILL. To exit pro-
gramming and return to the MAIN SCREEN, press
and release the ON/OFF pad.
P2875
36748 070706
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
PRESSING NO WILL
ADVANCE TO
REFILL
WHEN TIME HAS EXPIRED,
THE DISPLAY WILL READ:
ENABLEFRESHTIMER
NO DONE YES
FRESHNESS ALERT
BREW X
TEA
(-) DONE (+)
FRESHNESS ALERT
BREW FRESH BATCH
READY TO BREW
WATER TEMP: 205°
HOT TEA
(-) DONE (+)
ICED COFFEE
(-) DONE (+)
COFFEE
(-) DONE (+)
XXX REFILL 155
(-) DONE (+)
WITH NO FLASHING
PRESS DONE
WITH YES FLASHING
PRESS DONE
11. Once the set time has expired, the display will read
FRESHNESS ALERT BREW X, and then FRESHNESS
ALERT BREW FRESH BATCH alternating with the
MAIN SCREEN.
12. Empty the server/dispenser the previous batch was
brewed into and replace under the funnel.
13. Brew a new batch
14.
The freshness timer will reset. The display should
now return to the MAIN SCREEN.