Filter
Top Products
Page 33
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
TEA RECIPES:
DRIP TIME
This function allows the operator to adjust the DRIP
TIME (time from end of sprayhead flow to when liquid
stops dripping from the funnel). When the brew cycle
is complete, the display will show DRIPPING and will
countdown the time until the funnel empties.
Setting DRIP TIME:
Range: OFF to 5 minutes for all batch sizes.
NOTE: If the brewer is already in the DRIP TIME screen,
skip steps 1 through 10 and proceed directly to step
11.
1. Press and hold the right hidden button until the dis
-
play reads SET LANGUAGE. Press the right hidden
button until the display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now
read TEA 1, along with MODIFY SHOW NEXT.
3. Press and release NEXT to advance to the desired
recipe to be modified.
4. Press and release
MODIFY. The display should read
BREW OZ:
5. Press and release DONE. The display should read
2 BATCHES DONE?
6. Press and release YES. The display should now
read DILUTE OZ:
7. Press and release DONE. The display should read
2 BATCHES DONE?
8. Press and release YES. The display should now
read DILUTE DELY:
9. Press and release
DONE. The display should now
show the Brew Oz, Dilution Oz, and Dilution Delay
setting for the batch size just programmed. After
a 5 second delay, the display will read SET PULSE
BREW.
10. Press and release NO. The display should now read
DRIP TIME and a batch light should be flashing.
11. Using the (-) and (+), set the amount of time from
when the brew solenoid shuts off to when drip-out
occurs for that batch size.
12. When finished, press the other batch size and repeat
step 11.
13. When finished, press DONE. The display should
read 2 BATCHES DONE?
14. If both batch sizes are not correct, press and release
NO to return to the DRIP TIME setup screen and
repeat steps 11 through 13.
15. If both batch sizes are correct, press
YES. The
display should show the name of the recipe be-
ing programmed (modified) along with SETUP
COMPLETE. After a 5 second delay, the display will
advance to the next recipe name in the brewer’s
memory. To exit to the MAIN SCREEN, press and
release the ON/OFF button.
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
REVIEW RECIPES
NO YES
TEA 1
MODIFY SHOW NEXT
(RECIPE NAME)
MODIFY SHOW NEXT
ADVANCE TO THE
RECIPE TO BE
MODIFIED
SET BREW OZ XX.X
SET DILUTE OZ XX.X
AND SET DILUTE DELAY
WHEN BOTH BATCHES ARE DONE,
PRESS YES TO ADVANCE TO
EASY PULSE BREW
PRESSING NO WILL
ADVANCE TO NEXT
FUNCTION SCREEN
SET PULSE BREW
NO YES
DRIP TIME X:XX
(-) DONE (+)
2 BATCHES DONE?
NO YES
SET BOTH
BATCH SIZES
(RECIPE NAME)
SETUP COMPLETE
IF NO, RETURN TO
DRIP TIME
AFTER A 5 SECOND DELAY,
DISPLAY WILL ADVANCE
TO NEXT RECIPE IN
BREWER MEMORY
P2865
36748 051304