Filter
Top Products
6
41084 102709
OPERATING CONTROLS
ULTRA-1
There are three of these switches that will be used for the operation of the dispenser.
1.
switch (upper left corner of the control pad)
This switch is the ON/OFF toggle switch which powers up the dispenser and the LCD display. When ON
the Date and Time toggle back and forth continously except during programming.
2. (upper right corner)
This is used to turn the auger motor to AUGER ON, AUGER OFF or AUGER REFILL ON. (Refill only ap-
plicable when installed) (See *NOTE)
3. (lower right corner)
This is used to turn the ice control to OFF, ICE or CHILL.
1
2
3
P3932
*NOTE: Refill system includes a “Maximum Fill Time” in the software. If the time to fill the hopper exceeds this
limit, the hopper lights will flash and a “Refill Fault” will be displayed on the screen. If this accurs, check the
product supply to ensure the BIB is not empty. (Change BIB if empty). Then press the “ULTRA” button for 3
seconds to clear the fault and restart the refill system.