Filter
Top Products
16
TABLE 7.4: U.S. BOILER CONCENTRIC VENT COMPONENTS (VENT OPTION 1)
PART NO. DESCRIPTION SIZE
USED ON
VENT
OPTION #
COMMENTS
101005-01
80/125 x 60/100mm
REDUCING ELBOW
80/125 x
60/100mm
1 INCLUDED WITH STANDARD BOILER
101006-01 TERMINAL SECTION 60/100mm 1 INCLUDED WITH STANDARD BOILER
101007-01 WALL GROMMET 60/100mm 1 INCLUDED WITH STANDARD BOILER
100994-01 39” STRAIGHT 60/100mm 1 OPTIONAL - MAY NOT BE CUT
101161-01 78" STRAIGHT 60/100mm 1 OPTIONAL - MAY NOT BE CUT
100995-01 19 1/2” STRAIGHT 60/100mm 1 OPTIONAL - CAN BE CUT
100996-01 90 DEGREE ELBOW 60/100mm 1 OPTIONAL
101162-01 39" STRAIGHT 80/125mm 1 OPTIONAL - CAN BE CUT (Note #1)
100997-01 45 DEGREE ELBOW 60/100mm 1 OPTIONAL
TABLE 7.5: PERMISSIBLE STAINLESS STEEL VENT SYSTEMS AND
PRINCIPLE VENT COMPONENTS (VENT OPTIONS 2, 5)
MANUFACTURER VENT SYSTEM SIZE COMPONENT PART NUMBER
HEAT FAB
SAF-T VENT
EZ SEAL
3 BOILER COLLAR 101004-01
3 WALL THIMBLE HEAT FAB 7393, 7393GCS, 5391CI
3 HORIZONTAL TERMINAL 8110701
3 VERTICAL TERMINAL HEAT FAB 9392
PROTECH
SYSTEMS
INC.
FASNSEAL
3 BOILER COLLAR 101004-01
3 WALL THIMBLE FSWT3
3 HORIZONTAL TERMINAL 8110701
3 VERTICAL TERMINAL FSBS3
Z-FLEX
SVE
SERIES III
(“Z-VENT III”)
3 BOILER COLLAR 101004-01
3 WALL THIMBLE 2SVSWTEF03
3 HORIZONTAL TERMINAL 8110701
3 VERTICAL TERMINAL 24SVSTPF03
FLEX-L INTL. STAR-34
3 BOILER COLLAR 101004-01
3 WALL THIMBLE SR03WT15
3 HORIZONTAL TERMINAL 8110701
3 VERTICAL TERMINAL SRTP-03
NOTES:
1) See vent system manufacturer’s literature for other part numbers that are required such as straight
pipe, elbows, fi restops and vent supports.
2) Part No. 101004-01 collar replaces factory-mounted concentric collar (Figure 7.16).
Note #1: On 60/100mm vent systems, this may only be used between the boiler and the fi rst 80/125 x 60/100 Reducing Elbow (see text).