Filter
Top Products
Hot Drink Center Set-Up Manual
6530006 31
March, 2001
ADJUSTMENTS AND MINOR MAINTENANCE
This section contains procedures not normally used during setup, but may come
in handy later on.
I. Water Valve Adjustment
Water valves do not usually require adjustment, but in some cases adequate water
volume cannot be achieved by the throw time setting alone (see the Program
-
ming Guide). IF ABSOLUTELY NECESSARY, adjust the valves in conjunc-
tion with setting the factory default timers during the product configuration
programming mode.
a. Using a slotted screwdriver, turn the adjustment screw clockwise to
decrease the water flow rate.
b. Turn the adjustment screw counterclockwise to increase the water flow
rate.