Filter
Top Products
Hot Drink Center Set-Up Manual
32 6530006
March, 2001
II. Cup Mechanism Adjustment
a. Place seven cups in the cup ring.
b. Observe the clearance as shown in view B.
c. If necessary adjust by first loosening the adjustment arm screw (view
A).
d. Move adjustment arm until correct clearance is achieved.
e. Hold adjustment arm in place and tighten adjustment arm screw.
ADJUSTED
TOO LOOSE
ADJUSTED
TOO TIGHT
ADJUSTMENT
ARM
LOOSEN SCREW
MOVE ARM
CORRECT
ADJUSTMENT
CUP
CAM
CUP
CAM
This clearance is just
large enough to allow
cup ejection
This side is snug
against cam
316P0118
VIEW A
VIEW B