Filter
Top Products
HDC II Programming Guide Cup Configuration
July, 2003 20 6730018
SET THE MACHINE TYPE AND CONFIGURATION
CODE (SUPERVISOR MODE ONLY)
1. Press , then until the display shows or
2. Press or 1 to enter .
3. Press until the display shows . “D” is the automatic
delivery door status. A plus sign (+) means the door is on; a dash (-) means
the door is off. Toggle this setting by pressing
. “J” is the whipper
setting. Toggle a plus sign (+) or a dash (-) with the J key. See "Whipper
Options", PAGE 26 for more information. "WXYZ" is the machine config-
uration code. W represents the machine type, X is the 6th product configu-
ration, Y is the brewer configuration, and Z is canister mapping. The
following tables give the possible values for each of the four numbers.
Enter the appropriate configuration code for your machine.
Table D1 Machine Type Configuration
Enter for (W) Definition
1 Hot Drink Center model 675
5 Hot Drink Center models 673 and 677
Table D2 6th Product (Selection C) Configuration
Enter for (X) Definition
1 No 6th product
2 6th product present, but receives no condiments
3 6th product present, may receive condiments
4 Water only