Us er I ns tructions
10
MOVING THE FACING PANEL (PEEKABOO)
To lower the facing panel and reveal the FRONT DISPLAY, proceed as follows:
• Make sure that the door is closed.
• Push the facing panel down until the whole of the display is visible.To return the facing panel to
the normal position, push it back up.
WARNING:
• The facing panel can only be lowered with the door closed.
•
Once the facing panel has been lowered the door cannot be opened (see diagram).
• Before opening the door of the dishwasher make sure that the facing panel is in the high
position
.
• Never lower the facing panel and close the door simultaneously, first close the door, then lower the
facing panel.
• Never raise the facing panel and open the door simultaneously, first bring the facing panel to the high
position,
then open the door.
COMPLIANCE WITH THE INSTRUCTIONS PROVIDED
ABOVE ENSURES THE CORRECT OPERATION BOTH OF
THE SLIDING SYSTEM OF THE FACING PANEL AND OF
THE DISHWASHER ITSELF.