DCS DW-24SS Dishwasher User Manual


 
Us er I ns tructions
12
USING THE RINSE AID AND DETERGENT DISPENSERS
The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent
dispenser
is on the left, and the rinse aid dispenser is on the right.
With the exception of the SOAK program, before every washing cycle it is necessary to add the required
amount of detergent of the
detergent dispenser. The rinse aid, on the other hand, should only be
added as required.
ADDING THE RINSE AID
The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is
automatically added to the water during the final rinse cycle, from the container situated on the inner
side of the door.
Open the door
Rotate the container cap counterclockwise by 1/4 of a turn and remove it.
Add the rinse aid until the container is full (approximately 0.59 cup or 4.73 FL. OZ).The optical
level indicator on the side of the cap should be completely obscured. Refill the rinse aid when the
optical level indicator becomes clear again, or when the rinse aid warning light illuminates.
Replace the cover and turn it in a clockwise direction.
Use a cloth to remove any spillage of rinse aid which might lead to the formation of excess foam.
ADJUSTING THE RINSE AID DISPENSER SETTING
The dishwasher is factory set for medium water hardness. However it possible to change the setting by
turning the dispensers selector to the desired position: the amount of rinse aid dispensed is propor-
tional to the selector position.
The setting must be increased when the washed dishes appear dull or have circular staining.
To adjust the rinse aid setting, rotate the dispenser cap through a quarter turn in an counter-
clockwise direction and remove it.
Then use a screwdriver to rotate the rinse aid selector to the desired position.
Replace the cap, turning it clockwise.
The amount of rinse aid must be increased if the washed dishes appear dull or feature circular
stains.
If, on the other hand, the dishes are sticky or have white streaks, it is necessary to reduce the
rinse aid setting.