DeLonghi ETAM36.365 Coffeemaker User Manual


  Open as PDF
of 22
 
12
To display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the scrolling arrow (< or >) (g. 9) until “Statistics”
is displayed;
3. Press the button;
4. By pressing the scrolling arrow (< or >) (g. 9), you can
check:
- how many coees have been made;
- the total number of cappuccinos and milk based coees;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener lter has been re-
placed.
5. Press the MENU/ESC button twice to exit the menu.
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 10) re-
peatedly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, press the
button (g. 11) until the message corresponding to the re-
quired quantity of coee is displayed:
Coee selected Quantity in cup (ml)
MY COFFEE Programmable:
from ≃20 to ≃180
SHORT
≃40
STANDARD
≃60
LONG
≃90
EXTRA LONG
≃120
Customising the “my coee” quantity
The appliance is set by default to automatically deliver 30 ml
of “my coee”.
To modify this quantity, proceed as follows:
1. Place a cup under the coee spouts (g. 12).
2. Press the button (g. 10) until “MY COFFEE”
is displayed.
3. Press and hold the button (g. 15) until the mes-
sage “Program quantity 1 MY COFFEE” is displayed and
coee delivery begins. Release the button
4. As soon as the coee in the cup reaches the required level,
press the button (g. 15) again.
The quantity of coee in the cup set has now been pro-
grammed.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (g. 13).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied creamier coee, turn
one click anticlockwise towards “1” (do
not turn more than one click at a time
otherwise the coee could be delivered a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Tips for a hotter coee
For hotter coee, you should:
• performarinsecyclebyselectingthe“Rinsing”functionin
the settings menu (page 10)
• warmthecupsbyrinsingthemwithhotwater(usingthe
hot water function);
• increase thecoee temperature inthe settings menu
(page 11);
• Pressthe button to enable the cup warmer (the
symbol is displayed).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container with coee beans (g. 14).
2. Place under the coee spouts:
 previous next