Filter
Top Products
a) Setting manually
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to
position 1 or 2 (see table).
4. Replace the lower basket.
The dishwasher is factory set at
position 2.
b) Setting electronically
(The dishwasher must be switched off)
The dishwasher is factory set at level 5.
1. Press the On/Off button. The On/Off indicator light illuminates
(setting mode).
If a programme button indicator light is on, this means that a
washing programme has been set. The programme must be
cancelled: press simultaneously function buttons
2
and
3
for
about 2 seconds.
All the indicator lights will turn off (except for the On/Off
indicator light and eventually salt and rinse aid indicator lights)
indicating that the set programme has been cancelled and the
machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press function button 1, the indicator lights of function
buttons 2 and 3 turn off while the indicator light of button 1
goes on flashing, at the same time the indicator light End of
programme starts to flash.
The current level is indicated by the number of flashes of the
indicator light End of programme (see chart).
Example: 5 flashes = level 5.
Operating instructions
11
AA07
152963010en per uk.qxp 25/03/2004 15.30 Pagina 11