Filter
Top Products
Operating instructions
28
7. Cancelling the “delay start” in progress
It is possible to cancel a coutdown in progress or before it starts,
simply pressing the delay start button until the indicator lights
corresponding to the delay start hours (3H, 6H or 9H) turn off.
In this case the selected washing programme will start
automatically after a 3 seconds.
8. End of the washing programme
The dishwasher will automatically stop and the End of programme
phase indicator light will illuminated.
The indicator light of the programme just ended will remain on.
Switch off the dishwasher by pressing the On/Off button, the
On/Off indicator light turns off.
Open the door and wait a few minutes before removing the dishes;
in this way they will be cooler and the drying will be improved.
9. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should therefore be
allowed to cool down before removing from the appliance.
Empty the lower basket first and then the upper one; this will
avoid water dripping from the upper basket onto the dishes in the
lower one.
Water may appear on the sides and the door of the dishwasher as
the stainless steel will eventually become cooler then the dishes.
When the washing programme has finished, it is recommended
that the dishwasher is unplugged and the water tap turned off.
152963010en per uk.qxp 25/03/2004 15.31 Pagina 28