Filter
Top Products
Operating instructions
16
If you are using dishwasher detergent that already contains rinse aid,
it is necessary to deactivate the rinse aid dispenser, in order to avoid a
double dosage.
Deactivation/activation of the rinse aid dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been deactivated, the rinse aid
indicator light on the control panel is automatically deactivated.
1. Press the On/Off button. The On/Off indicator light illuminates
(setting mode).
If a programme button indicator light is on, this means that a
washing programme has been set. The programme must be
cancelled: press simultaneously function buttons
2
and
3
for
about 2 seconds.
All the indicator lights will turn off (except for the On/Off indicator
light and eventually salt and the rinse aid indicator lights)
indicating that the set programme has been cancelled and the
machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press function button 2, the indicator lights of function buttons 1
and 3 turn off while the indicator light of function button 2 goes
on flashing, at the same time the indicator light End of programme
illuminates indicating that rinse aid dispenser is active.
4. To deactivate the rinse aid dispenser, press function button 2 again,
the indicator light End of programme turns off, indicating that the
rinse aid dispenser has been deactivated.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
To activate rinse aid dispenser follow the above instructions until the
indicator light End of programme illuminates.
152963010en per uk.qxp 25/03/2004 15.31 Pagina 16