Filter
Top Products
15
Telescopic runners
To prevent scratches during transport,
the telescopic runners are covered
with a protective coating when
delivered. This coating must be
removed from the runners before they
are used, otherwise it can burn fast
and damage the rails.
Note! Make sure that the cooker anti-
tip guard is fitted, see page 8
The telescopic runners replace the ordinary
oven step units that are fitted in the cooker
when it is delivered. They consist of two
rails that can be pulled out. The shelves, the
roasting pan and the grid are laid on top of
the rails. A locating pin keeps the shelf in
position (see the illustration).
Use of the telescopic runners for facilitates
cooking. For example, when steak or chips
are to be basted, the roasting pan is easily
pulled out on the rails.
Fitting the rails
First remove the oven step units that are
fitted (see page 57). When fitting, the rails
are first inserted in the inner hole (1) and
then in the outer (2). Push into position.
MAKE
SURE
THAT
THE
LOCATING
PIN
IS
TURNED
OUTWARDS
TOWARDS
THE
OVEN
DOOR
.
The rails must be pushed in when the
oven door is closed.