Filter
Top Products
25
Cooking/roasting with Automax
This is how you activate the function.
NOTE! This must be done each time you
wish to use the automatic system.
1
Set the function
A
UTOMAX
,
A
appears
in the display.
2
Then make the desired setting for
cooking/roasting. It takes about
5 seconds before
A
lights up in the
indication area.
The heater zone display shows
A
. This
implies that the heating zone operates at
maximum heat for a certain time, depending
on the heating setting selected. See the
diagram.
When the time has expired, there is
automatic switch-over to the set value and the
letter
A
is no longer shown.
If the setting is changed during heating
with
A
UTOMAX
this function disappears and
re-setting must be carried out.
In general it can be said that settings 2–5
are suitable for cooking and settings 6–8 for
roasting. For heat retention, setting 1 is
suitable. But, as usual, you must experiment
to find the setting and heating zone that is
best for you and your pots and pans.
Here is a little advice concerning the right
heating setting and suitable heating zone.
Each zone corresponds to a number in the
tables (
SEE
ILLUSTRATION
).
Cooking
PORTIONS ZONE SETTING ONE
PORTION
porridge (oats, rye)
21,2,4 3
43 3
Potatoes
2-4 1,2,4 3-4 3 pc
0 12345 6789
1
2
3
4
5
6
7
8
9
HEAT SETTING
AUTOMAX approx. minutes