Filter
Top Products
8
Anti-tilt bracket
To fit the anti-tilt bracket:
After you have located where the cooker is to be positioned, mark on the wall the place
where the two screws of the anti-tilt bracket have to be fitted. Please follow the indications
given in the drawing below.
Make two 8 mm diameter holes in the wall and insert the plastic plugs.
Loosely attach the anti-tilt bracket with two screws.
Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can
engage in the slot on the cooker’s back.
Tightly attach the anti-tilt bracket.
Push the cooker against the wall so that the anti-tilt bracket is fully inserted into the slot
on the cooker’s back.
Important!
To restrain the appliance and prevent it tipping accidentally, fit a bracket to its rear to fix it
securely to the wall.
Installation instructions
Dotted line showing the position
of the cooker when installed
min 95 - max 110
(depending on feet regulation)
75
=
=
0
+15
Fig. 4 Fitting the anti-tilt bracket