Filter
Top Products
7
Fig. 2b Fitting the optional spacer
(supplied with the cooker
in a separate kit)
Levelling the cooker
To fit the adjustable feet:
Place the cooker on its back, as shown.
Screw the four feet to the cooker.
Stand the cooker and level it by
screwing or unscrewing the feet with a
spanner.
Installation instructions
Backguard
Before installing the cooker, assemble the
backguard “B” .
The backguard “B” can be found packed at the
rear of the cooker.
Before assembling, remove any protective film/
adhesive tape.
Remove the three screws “A” from the rear of
the cooktop.
Assemble the backguard as shown and fix it by
screwing the three screws “A”.
Fig. 3 Assembling the backguard
AA
B
Fig. 2a Fitting the
adjustable feet
(supplied with the cooker
in a separate kit)
+ 8 mm
+ 15 mm
0
+ 8 mm
Fig. 2c Levelling the cooker