Filter
Top Products
14
First use
Setting the Clock
Important!
The clock needs to be set before you can use your oven.
1
When the power to the oven is turned on
or restored after a power failure,
0
.
00 will flash in the display.
3
Touch the cooking time and
stop time
controls together for 2
seconds to accept the time.
the display will stop flashing
the oven will beep to confirm the time
is set.
2
Touch the - or + controls to set the time.
To Change the Time
4a
Touch the cooking time and stop time
controls together for 2 seconds.
The centre dot will flash.
4b
Touch the - and + controls to set the
new time.
4c
Touch the cooking time and stop time
controls together again for 2 seconds
to accept the new time.
the centre dot will stop flashing
the oven will beep to confirm the new
time is set.
Remove all cable ties and packaging
Important!
Before using your oven for the first time, remove
all cable ties and internal packaging holding the
shelving in place if the installer has not done so.
If you have catalytic panels (purchased separately)
you need to fit them before using the oven.
See ‘Care and Cleaning’ for instructions on how to
fit them.
We recommend you then condition the oven.