Filter
Top Products
39
Care and cleaning
Catalytic panel
1
1
2
retaining wire
lock stud
Fit both catalytic panels.
Place each catalytic panel flush against
the side wall, noting the position of the
cutouts for the lamp and lock nuts.
Replace shelving.
To replace a wire shelf, check the guard rail (as shown) to make sure the shelf is the right way
up. Slide it horizontally back along the side racks ensuring it is level and the stop notch is facing
down.
Replace both side racks.
To replace the side racks, locate the top of
the side rack into the two upper lock studs
and gently push the retaining wire back
under the lower lock stud.
Stop Notch
Shelf stop
Guard rail
Replacing a wire shelf