Fisher & Paykel OB76 Oven User Manual


 
41
Care and cleaning
Plate glass cover
Retainer clip
Sockets for
the pins
Pins
Replacement bulb
Changing the oven light bulbs
The oven is illuminated by three 12 volt/20 watt halogen bulbs. These have a very long life, but if
you should need to replace one, use only a replacement bulb purchased from your nearest Fisher
& Paykel dealer and follow these steps:
1
Allow the oven to cool and then turn it off at the wall.
2
Take out the shelves and side racks (see ‘Removing and replacing the sliding shelves and side
racks’) and use a small flat-head screwdriver to twist and lift the retainer clip at the top of the
glass light cover while holding the glass to prevent it falling. The clip pivots anti-clockwise (see
the diagram).
3
Carefully lift the glass cover out of the lower support and pull out the faulty bulb.
4
Holding the replacement bulb in a soft cloth or tissue (touching the bulb will reduce its life
span), insert the new bulb.
5
Reposition the glass cover and twist the top clip back in place. The procedure is the same for the
light in the roof of the oven cavity.
Note: oven bulb replacement is not covered by your warranty.