Filter
Top Products
53
Problem Possible causes What to do
Self Clean function
I have cancelled a Self
Clean cycle but cannot
use the oven:
the oven door will not
open
the display is still
counting down
minutes or showing
0:00
the Self Clean
function indicator is
still lit
the temperature
indicator shows
cascading bars
the dials and buttons
are unresponsive.
This is normal: if the function dial
halo is unlit, you have
successfully cancelled the
Self Clean cycle. However, the
oven is still too hot to be
used for cooking and
needs to cool down.
Wait until the cool-down phase
has finished. A long tone will
sound and the oven door will
automatically unlock when the
oven is ready to use.
Note: depending on when the
Self Clean cycle was cancelled,
the cool-down phase may take
up to 40 minutes.
The oven is beeping and
the display shows
or
A3.
See section ‘Alert codes’ for instructions.
There is a power cut
during a Self Clean cycle.
Power cut.
The door will remain locked.
Once the power is turned back
on, the door will remain locked
until the oven has cooled to a
safe temperature.
Troubleshooting