Filter
Top Products
C141-E124-01EN 3 - 69
3.1.20 REPORT LUNS (A0)
Bit
Byte
76543210
0X'A0'
100000000
200000000
300000000
400000000
500000000
6 Allocation Length (MSB)
7 Allocation Length
8 Allocation Length
9 Allocation Length (LSB)
1000000000
11000000FlagLink
This command requests that the peripheral device logical unit inventory be sent to the application
client.
This command normally operate under the reserve condition (RESERVE or PERSISTENT
RESERVE).
The "Allocation Length" should be at least 16 bytes. If the "Allocation Length" is less than 16
bytes, the IDD reports the CHECK CONDITION status (ILLEGAL REQUEST [=5] / Invalid Field
in CDB [=24-00]). If the "Allocation Length" is not sufficient to contain the entire logical unit
inventory, the device server shall report as many logical unit number values as fit in the specified
allocation length. This shall not be considered an error.
The device server shall report those devices in the logical unit inventory using the format shown in
below.