Filter
Top Products
Rev. May 2001 GraviMaster-FGB-M05 (S) Page 39
Gravimetric Blender
4.0 INSTALLATION
4.1 Services
For installation 1ph or 3ph supply is required dependent on type of unit and a 1/4” air supply
with a minimum 6bar.
4.2 Mounting
There are several ways where to place the GraviMaster, namely
- on a frame
- on a mezzanine
- on the machine
Before mounting the unit fi rst open the front panel and take out the mixing chamber.
Make sure nothing is connected yet.
The front panel can be opened by opening the fasteners.
You can take out the mixer chamber and the weigh bin when the frontdoor is open.
4.2. Mountingplate
s